Archives I/O Modules
Archives Digital Modules in IP20
Figure | Type | Housing | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. | Inputs digital | Outputs digital | Single wiring: 1 input or output per connection.
Y wiring: 2 inputs or outputs per connection.
Mixed wiring: 1 input and 1 output per connection.
Exact pin assignment see data sheet. | inputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, inputs shall not be connected to earth or to external potential. | Electronic outputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, outputs shall not be connected to earth or to external potential.
For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet. | Connection | The connection to ASi and AUX (24 V auxiliary power) is made for modules in the active distributor or blue IP67 housing via the yellow or black ASi profile cable with piercing technology or via an M12 plug. Modules for the control cabinet are connected via terminals and PCB modules via wiring pins, connection wires or terminals.
| Bihl+Wiedemann offers modules with AB address, single address or ASi-5 address. In some cases, ASi modules can occupy several (different) addresses. Mixed operation of modules with different addressing in the same ASi circuit is permitted. | Article No. |
---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
Stainless Steel in IP20, depth: 45 mm
|
depth: 45 mm
|
IP20
|
no digital inputs
|
8 x electronic
|
no M8/M12 wiring
|
no input voltage
|
out of AUX
|
spring type terminals
|
spring type terminals
|
2 AB addresses
| BW2078 ASi Digital Output Module in stainless steel, IP20, 8O |
![]() |
IP20, 22,5 mm x 114 mm, 4 x 4 contacts
|
4 x COMBICON
|
IP20
|
4
|
4 x electronic
|
no M8/M12 wiring
|
out of AUX
|
out of AUX
|
push in terminals
|
Push-in terminals
|
1 AB address
| BWU1938 ASi Digital I/O Module, IP20, 4I/4O |
![]() |
IP20, 22,5 mm x 92 mm, 4 x 4 contacts
|
22.5 mm x 99.0 mm x 92.0 mm, 4 x 4 contacts
|
IP20
|
4
|
3 x electronic
|
no M8/M12 wiring
|
out of AUX
|
out of AUX
|
push in terminals
|
Push-in terminals
|
1 AB address
| BWU4183 ASi Digital I/O Module, IP20, 4I/3O |
![]() |
IP20, 22,5 mm x 114 mm
|
22,5 mm x 114 mm
|
IP20
|
4
|
4 x electronic
|
no M8/M12 wiring
|
out of AUX
|
out of AUX
|
pluggable terminals
|
pluggable terminals
|
1 AB address
| BW4968 ASi Digital I/O Module, IP20, 4I/4O, terminal plugs not included |
![]() |
IP20, 22,5 mm x 114 mm, 4 x 4 contacts
|
4 x COMBICON
|
IP20
|
4 (NPN)
|
4 x electronic (NPN)
|
no M8/M12 wiring
|
out of AUX
|
out of AUX
|
push in terminals
|
Push-in terminals
|
1 AB address
| BW5053 ASi Digital I/O Module, IP20, 4I (NPN)/4O (NPN), terminal plugs not included |
![]() |
IP20, 22,5 mm x 114 mm, 6 x 4 contacts
|
22.5 mm x 99.0 mm x 114.5 mm, 6 x 4 contacts
|
IP20
|
4
|
4 x electronic
|
no M8/M12 wiring
|
out of ASi
|
out of AUX
|
push in terminals
|
Push-in terminals
|
1 Single address
| BWU4269 ASi Digital I/O Module, IP20, 4I/4O |
![]() |
IP20, 22,5 mm x 114 mm, 6 x 4 contacts
|
22.5 mm x 99.0 mm x 114.5 mm, 6 x 4 contacts
|
IP20
|
4
|
4 x electronic
|
no M8/M12 wiring
|
out of ASi
|
out of AUX
|
push in terminals
|
Push-in terminals
|
1 AB address
| BWU4270 ASi Digital I/O Module, IP20, 4I/4O |
Archives Digital Modules in IP67
Figure | Type | Housing | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. | Inputs digital | Outputs digital | Single wiring: 1 input or output per connection.
Y wiring: 2 inputs or outputs per connection.
Mixed wiring: 1 input and 1 output per connection.
Exact pin assignment see data sheet. | inputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, inputs shall not be connected to earth or to external potential. | Electronic outputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, outputs shall not be connected to earth or to external potential.
For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet. | Connection | The connection to ASi and AUX (24 V auxiliary power) is made for modules in the active distributor or blue IP67 housing via the yellow or black ASi profile cable with piercing technology or via an M12 plug. Modules for the control cabinet are connected via terminals and PCB modules via wiring pins, connection wires or terminals.
| Bihl+Wiedemann offers modules with AB address, single address or ASi-5 address. In some cases, ASi modules can occupy several (different) addresses. Mixed operation of modules with different addressing in the same ASi circuit is permitted. | Article No. |
---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
IP67, 4 x M12, EXTREME
|
4 x M12
|
IP67
|
4
|
no digital outputs
|
Y
|
out of ASi
|
no output voltage
|
4 x M12 sockets, 5 poles
|
ASi profile cable
|
1 AB address
| BWU3145 ASi Digital Input Module EXTREME, IP67, M12, 4I |
![]() |
IP67, 8 x M12, EXTREME
|
8 x M12
|
IP67
|
4
|
4 x electronic
|
Y
|
out of ASi
|
out of AUX
|
8 x M12 sockets, 5 poles
|
ASi profile cable
|
1 AB address
| BWU3144 ASi Digital I/O Module EXTREME, IP67, M12, 4I/4O |
![]() |
IP67, 4 x M12
|
4 x M12
|
IP67
|
2
|
2 x electronic, special ASi bit assignment
|
Y
|
out of ASi
|
out of AUX
|
4 x M12 sockets, 5 poles
|
ASi profile cable
|
1 AB address
| BWU3449 ASi Digital I/O Module, IP67, M12, 2I/2O |
![]() |
IP67, 8 x M12
|
8 x M12
|
IP67
|
4
|
3 x electronic
|
Y
|
out of ASi
|
out of AUX
|
8 x M12 sockets, 5 poles
|
ASi profile cable
|
1 AB address
| BWU4382 ASi Digital I/O Module, IP67, M12, 4I/3O |
![]() |
IP67, 8 x M12
|
8 x M12
|
IP67
|
4
|
4 x electronic
|
Y
|
out of ASi
|
out of AUX, 2 A per output
|
8 x M12 sockets, 5 poles
|
ASi via M12
|
1 Single address
| BWU3895 ASi Digital I/O Module, IP67, M12, 4I/4O |
![]() |
IP67, 8 x M12
|
8 x M12
|
IP67
|
4
|
4 x electronic
|
Single
|
out of ASi
|
out of AUX
|
8 x M12 sockets, 5 poles
|
ASi profile cable
|
1 Single address
| BWU4383 ASi Digital I/O Module, IP67, M12, 4I/4O |
![]() |
IP67, 8 x M12
|
8 x M12
|
IP67
|
4
|
4 x electronic
|
Single
|
out of ASi
|
out of AUX
|
8 x M12 sockets, 5 poles
|
ASi via M12
|
1 Single address (S-7.0.F.E)
| BWU4415 ASi Digital I/O Module, IP67, M12, 4I/4O |
Archive digital modules in IP67 - replacement compatible with Schneider Electric
Figure | Type | Housing | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. | Inputs digital | Outputs digital | Single wiring: 1 input or output per connection.
Y wiring: 2 inputs or outputs per connection.
Mixed wiring: 1 input and 1 output per connection.
Exact pin assignment see data sheet. | inputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, inputs shall not be connected to earth or to external potential. | Electronic outputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, outputs shall not be connected to earth or to external potential.
For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet. | Connection | The connection to ASi and AUX (24 V auxiliary power) is made for modules in the active distributor or blue IP67 housing via the yellow or black ASi profile cable with piercing technology or via an M12 plug. Modules for the control cabinet are connected via terminals and PCB modules via wiring pins, connection wires or terminals.
| Bihl+Wiedemann offers modules with AB address, single address or ASi-5 address. In some cases, ASi modules can occupy several (different) addresses. Mixed operation of modules with different addressing in the same ASi circuit is permitted. | The node profiles allow numerous quickly configurable settings to be made on the module in order to optimally support the connected peripherals in most applications. The easiest way to select the node profiles is via the PC software. If ID1 is in brackets (), this means it is the changeable default value; if ID1 is without brackets, it means it is a fixed, unchangeable value. | Required profile that the ASi master needs to have in order to connect and operate the module. | Article No. |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
IP67, 4 x M12
|
4 x M12
|
IP67
|
4
|
no digital outputs
|
standard
|
out of ASi
|
no output voltage
|
4 x M12 sockets, 5 poles
|
ASi profile cable
|
1 Single address
|
S-0.0.F.E
|
M0 ... M4
| BWU3682 ASi Digital Input Module, IP67, M12, 4I |
![]() |
IP67, 8 x M12
|
8 x M12
|
IP67
|
4
|
3 x electronic
|
standard
|
out of ASi
|
out of AUX, 2 A per output
|
8 x M12 sockets, 5 poles
|
ASi profile cable
|
1 AB address
|
S-7.A.(7).0
|
M3 .. M4
| BWU3701 ASi Digital I/O Module, IP67, M12, 4I/3O |
![]() |
IP67, 8 x M12
|
8 x M12
|
IP67
|
4
|
4 x electronic
|
standard
|
out of ASi
|
out of AUX, 2 A per output
|
8 x M12 sockets, 5 poles
|
ASi profile cable
|
1 Single address (S-7.0.F.E)
|
S-7.0.(F).E
|
M0 ... M4
| BWU3686 ASi Digital I/O Module, IP67, M12, 4I/4O |
![]() |
IP67, 8 x M12
|
8 x M12
|
IP67
|
8
|
no digital outputs
|
dual (Y)
|
out of ASi
|
no output voltage
|
8 x M12 sockets, 5 poles
|
ASi profile cable
|
2 AB addresses
|
S1-0.A.(7).2, S2-0.A.(7).2
|
M3 .. M4
| BWU3523 ASi Digital Input Module, IP67, M12, 8I |
Archiv: Active Distributor ASi, IP67/IP54/IP20
Figure | Type | Housing | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. | Inputs digital | Outputs digital | inputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, inputs shall not be connected to earth or to external potential. | Electronic outputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, outputs shall not be connected to earth or to external potential.
For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet. | Connection | Single wiring: 1 input or output per connection.
Y wiring: 2 inputs or outputs per connection.
Mixed wiring: 1 input and 1 output per connection.
Exact pin assignment see data sheet. | Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled. In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted. | Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation. | The module has connections for ASi and/or AUX profile cables to supply data and (auxiliary) power. Depending on the design, the devices also have an integrated profile cable derivation. | The connection to ASi and AUX (24 V auxiliary power) is made for modules in the active distributor or blue IP67 housing via the yellow or black ASi profile cable with piercing technology or via an M12 plug. Modules for the control cabinet are connected via terminals and PCB modules via wiring pins, connection wires or terminals.
| Bihl+Wiedemann offers modules with AB address, single address or ASi-5 address. In some cases, ASi modules can occupy several (different) addresses. Mixed operation of modules with different addressing in the same ASi circuit is permitted. | Special function | Article No. |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
Active distributor ASi
|
depth: 35 mm
|
IP67
|
1
|
no digital outputs
|
out of ASi
|
no output voltage
|
1 x M12 cable socket, angled, 5 poles
|
Single
|
2 m
|
yes, depth: 35 mm
|
1 x ASi
|
ASi profile cable
|
1 Single address
|
no special function
| BWU3625 Active Distributor ASi, IP67, 1I |
![]() |
Active distributor ASi
|
depth: 35 mm
|
IP67
|
3
|
3 x electronic
|
out of ASi
|
out of ASi
|
1 x M12 cable socket, straight, 8 poles
|
no M8/M12 wiring
|
1 m
|
yes, depth: 35 mm
|
1 x ASi
|
ASi profile cable
|
1 AB address
|
no special function
| BWU4892 Active Distributor ASi, IP67, 3I/3O |
![]() |
Active distributor ASi
|
depth: 19 mm
|
IP67
|
1
|
no digital outputs
|
out of AUX
|
no output voltage
|
1 x M12 cable socket, straight, 8 poles
|
Single
|
2 m
|
yes, depth: 19 mm
|
1 x ASi, 1 x AUX 24 V
|
ASi profile cable
|
1 AB address
|
to connect Schmerzal AZM161 and Fortress amGardPro to ASi
| BWU4905 Active Distributor ASi, IP67, 1I |
Archives Analog Modules
Figure | Type | Housing | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. | Inputs analog | Outputs analog | inputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, inputs shall not be connected to earth or to external potential. | Electronic outputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, outputs shall not be connected to earth or to external potential.
For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet. | The connection to ASi and AUX (24 V auxiliary power) is made for modules in the active distributor or blue IP67 housing via the yellow or black ASi profile cable with piercing technology or via an M12 plug. Modules for the control cabinet are connected via terminals and PCB modules via wiring pins, connection wires or terminals.
| Bihl+Wiedemann offers modules with AB address, single address or ASi-5 address. In some cases, ASi modules can occupy several (different) addresses. Mixed operation of modules with different addressing in the same ASi circuit is permitted. | Article No. |
---|---|---|---|---|---|---|---|---|---|---|
![]() |
IP20, 22,5 mm x 92 mm, 4 x 4 contacts
|
22.5 mm x 99.0 mm x 92.0 mm, 4 x 4 contacts
|
IP20
|
2 x 4 ... 20 mA/2 x 0 … 10 V
|
no analog outputs
|
selectable, out of ASi or out of AUX, Default out of ASi
|
no output voltage
|
Push-in terminals
|
1 Single address
| BWU1345 ASi Analog Input Module, IP20, 2AI (4...20mA/0…10V) |
![]() |
IP20, 22,5 mm x 92 mm, 4 x 4 contacts
|
22.5 mm x 99.0 mm x 92.0 mm, 4 x 4 contacts
|
IP20
|
no analog input
|
2 x 0 … 20 mA/2 x 0 …10 V
|
no input voltage
|
selectable, out of ASi or out of AUX, default out of AUX
|
Push-in terminals
|
1 Single address
| BWU1727 ASi Analog Output Module, IP20, 2AO (0...20mA/0...10V) |
![]() |
IP20, 25 mm x 105 mm, 6 x 4 contacts
|
25.0 mm x 105.0 mm x 114.5 mm, 6 x 4 contacts
|
IP20
|
4 x 4 … 20 mA
|
no analog outputs
|
out of ASi or out of AUX, auto switching
|
no output voltage
|
Push-in terminals
|
1 Single address
| BWU1364 ASi Analog Input Module, IP20, 4AI (4…20mA) |
![]() |
IP20, 25 mm x 105 mm, 6 x 4 contacts
|
25.0 mm x 105.0 mm x 114.5 mm, 6 x 4 contacts
|
IP20
|
4 x 0 ... 10 V
|
no analog outputs
|
out of ASi or out of AUX, auto switching
|
no output voltage
|
Push-in terminals
|
1 Single address
| BWU1365 ASi Analog Input Module, IP20, 4AI (0...10V) |
![]() |
IP20, 25 mm x 105 mm, 6 x 4 contacts
|
25.0 mm x 105.0 mm x 114.5 mm, 6 x 4 contacts
|
IP20
|
no analog input
|
4 x 0 … 20 mA
|
no input voltage
|
out of ASi or out of AUX, auto switching
|
Push-in terminals
|
1 Single address
| BWU1366 ASi Analog Output Module, IP20, 4AO (0...20mA) |
![]() |
IP20, 25 mm x 105 mm, 6 x 4 contacts
|
25.0 mm x 105.0 mm x 114.5 mm, 6 x 4 contacts
|
IP20
|
no analog input
|
4 x 0 ... 10 V
|
no input voltage
|
out of ASi or out of AUX, auto switching
|
Push-in terminals
|
1 Single address
| BWU1367 ASi Analog Output Module, IP20, 4AO (0...10V) |
![]() |
IP20, 25 mm x 105 mm, 6 x 4 contacts
|
25.0 mm x 105.0 mm x 114.5 mm, 6 x 4 contacts
|
IP20
|
4 x thermocouple type K
|
no analog outputs
|
out of ASi
|
no output voltage
|
Push-in terminals
|
1 Single address
| BWU2243 ASi Analog Input Module, IP20, 4AI (thermocouple type K) |
![]() |
IP20, 22,5 mm x 92 mm, 4 x 4 contacts
|
22.5 mm x 99.0 mm x 92.0 mm, 4 x 4 contacts
|
IP20
|
2 x 4 ... 20 mA/2 x 0 … 10 V
|
no analog outputs
|
out of ASi
|
no output voltage
|
Push-in terminals
|
1 Single address
| BWU1726 ASi Analog Input Module, IP20, 2AI (4...20mA/0…10V) |
![]() |
IP20, 25 mm x 105 mm, 6 x 4 contacts
|
25.0 mm x 105.0 mm x 114.5 mm, 6 x 4 contacts
|
IP20
|
4 x Pt1000
|
no analog outputs
|
out of ASi
|
no output voltage
|
Push-in terminals
|
1 Single address
| BWU2481 ASi Analog Input Module, IP20, 4AI (Pt1000) |
![]() |
IP65, 3 x PG
|
3 x PG
|
IP65
|
Load cell
|
no analog outputs
|
out of ASi
|
no output voltage
|
ASi profile cable
|
1 Single address
| BWU1465 ASi Analog Input Module, IP65, PG, load cell |
![]() |
IP65, 3 x PG
|
3 x PG
|
IP65
|
Load cell
|
no analog outputs
|
out of ASi
|
no output voltage
|
ASi profile cable
|
1 Single address
| BWU2240 ASi Analog Input Module, IP65, PG, load cell |
![]() |
IP65, 8 x PG
|
8 x PG
|
IP65
|
4 x Pt100
|
no analog outputs
|
out of ASi
|
no output voltage
|
ASi profile cable
|
1 Single address
| BWU2241 ASi Analog Input Module, IP65, PG, 4AI (Pt100) |
![]() |
IP65, 2 x M12, width: 45 mm
|
width: 45 mm
|
IP65
|
2 x 4 … 20 mA
|
no analog outputs
|
out of ASi
|
no output voltage
|
ASi profile cable
|
1 AB address
| BWU1893 ASi Analog Input Module, IP65, M12, 2AI (4…20mA) |
![]() |
IP65, 2 x M12, width: 45 mm
|
width: 45 mm
|
IP65
|
2 x 4 … 20 mA
|
no analog outputs
|
out of ASi
|
no output voltage
|
ASi profile cable
|
1 Single address
| BWU1894 ASi Analog Input Module, IP65, M12, 2AI (4…20mA) |
![]() |
IP65, 2 x M12, width: 45 mm
|
width: 45 mm
|
IP65
|
2 x 0 ... 10 V
|
no analog outputs
|
out of ASi
|
no output voltage
|
ASi profile cable
|
1 AB address
| BWU1963 ASi Analog Input Module, IP65, M12, 2AI (0…10V) |
![]() |
IP65, 2 x M12, width: 45 mm
|
width: 45 mm
|
IP65
|
2 x 0 ... 10 V
|
no analog outputs
|
out of ASi
|
no output voltage
|
ASi profile cable
|
1 Single address
| BWU1964 ASi Analog Input Module, IP65, M12, 2AI (0…10V) |
![]() |
IP65, 2 x M12, width: 45 mm
|
width: 45 mm
|
IP65
|
2 x Pt100
|
no analog outputs
|
out of ASi
|
no output voltage
|
ASi profile cable
|
1 AB address
| BWU1895 ASi Analog Input Module, IP65, M12, 2AI (Pt100) |
![]() |
IP20, 22,5 mm x 92 mm, 4 x 4 contacts
|
22.5 mm x 99.0 mm x 92.0 mm, 4 x 4 contacts
|
IP20
|
2 x 4 ... 20 mA/2 x 0 … 10 V
|
no analog outputs
|
selectable, out of ASi or out of AUX, Default out of ASi
|
no output voltage
|
Push-in terminals
|
1 AB address
| BWU1897 ASi Analog Input Module, IP20, 2AI (4...20mA/0…10V) |
![]() |
IP65, 4 x M12, width: 90 mm
|
width: 90 mm
|
IP65
|
1 x 4 … 20 mA/0 … 10 V
|
1x 0 … 20 mA
|
out of ASi
|
out of ASi
|
ASi profile cable
|
2-4 Single addresses
| BWU1917 ASi Analog I/O Module, IP65, M12, 1AI (4...20mA/0...10V)/1AO (0...20mA) |
![]() |
IP65, 4 x M12, width: 90 mm
|
width: 90 mm
|
IP65
|
1 x 4 … 20 mA/0 … 10 V
|
1 x 0 ... 20 mA/0 ... 10 V
|
out of AUX
|
out of AUX
|
ASi profile cable
|
2-4 Single addresses
| BWU1853 ASi Analog I/O Module, IP65, M12, 1AI (4...20mA/0...10V)/1AO (0...20mA/0...10V) |
![]() |
IP65, 4 x M12, width: 90 mm
|
width: 90 mm
|
IP65
|
4 x 4 … 20 mA
|
no analog outputs
|
out of ASi or out of AUX, auto switching
|
no output voltage
|
ASi profile cable
|
1 Single address
| BWU1359 ASi Analog Input Module, IP65, M12, 4AI (4…20mA) |
![]() |
IP65, 4 x M12, width: 90 mm
|
width: 90 mm
|
IP65
|
4 x 0 ... 10 V
|
no analog outputs
|
out of ASi or out of AUX, auto switching
|
no output voltage
|
ASi profile cable
|
1 Single address
| BWU1360 ASi Analog Input Module, IP65, M12, 4AI (0...10V) |
![]() |
IP65, 4 x M12, width: 90 mm
|
width: 90 mm
|
IP65
|
4 x Pt100, 2/4 wire mode
|
no analog outputs
|
out of ASi
|
no output voltage
|
ASi profile cable
|
1 Single address
| BWU1363 ASi Analog Input Module, IP65, M12, 4AI (Pt100, 2/4 wire mode) |
![]() |
IP65, 4 x M12, width: 90 mm
|
width: 90 mm
|
IP65
|
4 x Pt100, 2/3 wire mode
|
no analog outputs
|
out of ASi
|
no output voltage
|
ASi profile cable
|
1 Single address
| BWU2532 ASi Analog Input Module, IP65, M12, 4AI (Pt100, 2/3 wire mode) |
![]() |
IP65, 4 x M12, width: 90 mm
|
width: 90 mm
|
IP65
|
no analog input
|
4 x 0 … 20 mA
|
no input voltage
|
out of AUX
|
ASi profile cable
|
1 Single address
| BWU1722 ASi Analog Output Module, IP65, M12, 4AO (0...20mA) |
![]() |
IP65, 4 x M12, width: 90 mm
|
width: 90 mm
|
IP65
|
no analog input
|
4 x 0 … 20 mA
|
no input voltage
|
out of ASi or out of AUX, auto switching
|
ASi profile cable
|
1 Single address
| BWU1361 ASi Analog Output Module, IP65, M12, 4AO (0...20mA) |
![]() |
IP65, 4 x M12, width: 90 mm
|
width: 90 mm
|
IP65
|
no analog input
|
4 x 0 ... 10 V
|
no input voltage
|
out of ASi or out of AUX, auto switching
|
ASi profile cable
|
1 Single address
| BWU1362 ASi Analog Output Module, IP65, M12, 4AO (0...10V) |
![]() |
IP65, 4 x M12, width: 90 mm
|
width: 90 mm
|
IP65
|
no analog input
|
4 x 0 … 10 V; 24 V, 0 V via M12
|
no input voltage
|
out of ASi or out of AUX, auto switching
|
ASi profile cable
|
1 Single address
| BWU2857 ASi Analog Output Module, IP65, M12, 4AO (0...10V; 24V/0V via M12) |