BWU2241ASi Analog Input Module, IP65, PG, 4AI (Pt100)
Product description
ASi Analog Input Module in IP65, with 8 x PG cable connectors, 4 analog inputs (Pt100), input voltage/sensor supply out of ASi, periphery connection via 8 x PG cable connectors, ASi connection via profile cable and piercing technology, 1 single address
ASi Analog Input Module in IP65, with 8 x PG cable connectors, 4 analog inputs (Pt100), input voltage/sensor supply out of ASi, periphery connection via 8 x PG cable connectors, 1 single address
Technical data
| Type | IP65, 8 x PG |
| Housing | 8 x PG |
|
Protection rating
"IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. | IP65 |
| Inputs digital | no digital inputs |
| Outputs digital | no digital outputs |
|
M8/M12 wiring
Single wiring: 1 input or output per connection.
Y wiring: 2 inputs or outputs per connection.
Mixed wiring: 1 input and 1 output per connection.
Exact pin assignment see data sheet. | no M8/M12 wiring |
|
Input voltage (sensor supply)
inputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, inputs shall not be connected to earth or to external potential. | out of ASi |
|
Output voltage (actuator supply)
Electronic outputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, outputs shall not be connected to earth or to external potential.
For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet. | no output voltage |
| Connection | 8 x PG cable connectors |
|
ASi connection
The connection to ASi and AUX (24 V auxiliary power) is made for modules in the active distributor or blue IP67 housing via the yellow or black ASi profile cable with piercing technology or via an M12 plug. Modules for the control cabinet are connected via terminals and PCB modules via wiring pins, connection wires or terminals.
| ASi profile cable |
|
ASi address
Bihl+Wiedemann offers modules with AB address, single address or ASi-5 address. In some cases, ASi modules can occupy several (different) addresses. Mixed operation of modules with different addressing in the same ASi circuit is permitted. | 1 Single address |
