BWU4947ASi-5 Cable Duct Motor Module, IP54, M8 for 24 V motorized rollers, 2M/4I

BWU4947fileadmin/verteiler/4_Bild/4947_with_cable.jpg
  • BWU4947
  • Control and supply of 2 x 24 V motorized rollers
  • E.g. Interroll EC5000 AI, 24 V, 20 W/35 W, Itoh Denki PM500XC/XK, Rulmeca RDR BL-3
  • Cyclic writing of speed and ramps possible
  • Line protection fuse, separately for each motor 5,0 A

    Product description

    ASi-5 Cable duct motor module in IP54, with 2 x M12 cable sockets and 2 x M8 snap-in cable sockets for 2 x 24 V motorized rollers e.g. (EC5000 AI, 24 V, 20 W/35 W), Itoh Denki (PM500XC/XK), Rulmeca (RDR BL-3), 4 digital inputs, input voltage/sensor supply out of ASi, output voltage/actuator supply out of AUX, internal line protection, separately for each motor 5,0 A (slow-blow fuse), flat design, installation in cable duct possible (installation depth ≥ 18 mm), periphery connection via 2 x M8 snap-in cable sockets, straight, 5 poles (drives) and 2 x M12 cable sockets, straight, 5 poles (sensors), cable length of motor connections 2,0 m, cable length of input connections 2,0 m, ASi connection via profile cable and piercing technology, 1 ASi-5 address

     

    Technical data

    Drive

    If you cannot find your drive, please do not hesitate to contact us. Bihl+Wiedemann creates customized drive solutions with ASi for motorized rollers, DC motors and frequency inverters.

    		 Interroll EC5000 AI, 24 V (20 W/35 W), Itoh Denki PM500XC/XK, RULMECA RDR BL-3
    Number of Drives 2
    Inputs digital 4
    Outputs digital no digital outputs
    Input voltage (sensor supply)

    inputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

    		 out of ASi and out of AUX
    Output voltage (actuator supply)

    Electronic outputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

     

    For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

    		 out of AUX
    Connection 2 x M12 cable sockets, straight, 5 poles, 2 x M8 snap-in cable sockets, straight, 5 poles
    Round cable

    Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

    In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

    		 2 m
    ASi address

    Bihl+Wiedemann offers modules with AB address, single address or ASi-5 address. In some cases, ASi modules can occupy several (different) addresses. Mixed operation of modules with different addressing in the same ASi circuit is permitted.
    For ASi modules with two ASi-3 nodes, the second ASi-3 node is turned off as long as the first ASi-3 node is addressed to address "0".
    Upon request, ASi modules are available with specific ASi node profiles.

    		 1 ASi-5 address

    How to get started with Bihl+Wiedemann products

    How to easily implement your ASi installation

    How to troubleshoot an existing ASi installation

    Manuals

      EPLAN Macros

      Video Tutorial

      Quick Start Guides


      Related products