Archives Drive solutions
Archives Drive solutions
Figure | Type | The device communicates via the standard ASi-3 and/or ASi-5. | Housing | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. | If you cannot find your drive, please do not hesitate to contact us. Bihl+Wiedemann creates customized drive solutions with ASi for motorized rollers, DC motors and frequency inverters. | Number of Drives | "yes": In the motor module UL approved fuses are placed before each of the motor supply connections. A short circuit in the motor causes this fuse to blow, protecting the connection cable between the module and motor. After blowing the not exchangeable fuse the module is no longer functional and the module needs to be replaced. The characteristics of the fuse must be checked against the motor data before using the module. The protection circuit in the module allows a very simple protection of the motor cables. The fuse for the cable protection is a slow-blow one; without short circuit the robust behavior of the module remains.
The motor module is designed to supply the 24 V directly to the motor. At high currents or surges as they occur for example at braking, the module will not be damaged. The cable protection should be realized outside the motor module with additional measures. | Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation. | Inputs digital | Outputs digital | inputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, inputs shall not be connected to earth or to external potential. | Electronic outputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, outputs shall not be connected to earth or to external potential.
For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet. | Connection | Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled. In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted. | The connection to ASi and AUX (24 V auxiliary power) is made for modules in the active distributor or blue IP67 housing via the yellow or black ASi profile cable with piercing technology or via an M12 plug. Modules for the control cabinet are connected via terminals and PCB modules via wiring pins, connection wires or terminals.
| Required profile that the ASi master needs to have in order to connect and operate the module. | The node profiles allow numerous quickly configurable settings to be made on the module in order to optimally support the connected peripherals in most applications. The easiest way to select the node profiles is via the PC software. If ID1 is in brackets (), this means it is the changeable default value; if ID1 is without brackets, it means it is a fixed, unchangeable value. | Bihl+Wiedemann offers modules with AB address, single address or ASi-5 address. In some cases, ASi modules can occupy several (different) addresses. Mixed operation of modules with different addressing in the same ASi circuit is permitted. | Article No. |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
Cylindrical ASi Actuator in stainless steel
|
ASi-3 compatible
|
M18 sleeve in stainless steel, 55 mm
|
IP67
|
-
|
-
|
no
|
-
|
1
|
3 x electronic
|
out of ASi
|
out of ASi
|
1 x round cable/connecting wires
|
0,20 m
|
ASi via M12
|
M3 .. M4
|
S-9.A.E
|
1 AB address
| BWU1647 Cylindrical ASi Actuator 1I/3O |
![]() |
IP65, 4 x M12, width: 90 mm
|
ASi-3 compatible
|
width: 90 mm
|
IP65
|
SEW MOVIMOT
|
1
|
no
|
no
|
2
|
no digital outputs
|
out of ASi
|
out of AUX
|
3 x M12 sockets, 5 poles
|
no
|
ASi profile cable
|
M3 .. M4
|
S-7.F.1.E
|
1 Single address
| BWU2038 ASi Motor Module, IP65, M12 for SEW frequency inverter, 2I |
![]() |
Active distributor ASi motor module
|
ASi-3 compatible
|
depth: 35 mm
|
IP67
|
Volta24 BLDC
|
1
|
no
|
yes, depth: 35 mm
|
1
|
no digital outputs
|
out of AUX
|
out of AUX
|
1 x M12 cable socket, straight, 8 poles, 1 x M8 cable socket, straight, 4 poles
|
1 m
|
ASi profile cable
|
M4
|
S-7.A.(7).0
|
1 AB address
| BWU3907 Active Distributor ASi Motor Module for Volta24 BLDC drives, IP67, M12/M8, 1M/1I |
![]() |
Active distributor ASi motor module
|
ASi-3 compatible
|
depth: 35 mm
|
IP67
|
SEW MOVIMOT
|
1
|
no
|
yes, depth: 35 mm
|
3
|
no digital outputs
|
out of ASi and out of AUX
|
out of AUX
|
1 x M12 cable socket, straight, 8 poles + 3 x M12 cable sockets, straight, 5 poles
|
I1: 1 m, I2...I4: 0,3 m
|
ASi profile cable
|
M0 ... M4
|
S-7.0.(F).E
|
1 Single address
| BWU3631 Active Distributor ASi Motor Module for SEW MOVIMOT with binary control, IP67, 1M/3I |
![]() |
Active distributor ASi motor module
|
ASi-3 compatible
|
depth: 35 mm
|
IP67
|
Lenze Smart Motor
|
1
|
no
|
yes, depth: 35 mm
|
3
|
no digital outputs
|
out of AUX
|
out of AUX
|
4 x M12 cable sockets, angled, 5 poles
|
M: 1,5 m, I: 2,5 m
|
ASi profile cable
|
M4
|
S-7.A.(7).E
|
1 AB address
| BWU3783 Active Distributor ASi Motor Module for Lenze Smart Motor, IP67, 4I/3O |
![]() |
IP67, 4 x M12
|
ASi-3 compatible
|
4 x M12
|
IP67
|
SEW MOVIMOT
|
1
|
no
|
no
|
2
|
no digital outputs
|
out of ASi
|
out of AUX
|
3 x M12 sockets, 5 poles
|
no
|
ASi profile cable
|
M3 .. M4
|
S-7.F.(F).E
|
1 Single address
| BWU3840 ASi Motor Module, IP67, M12 for SEW frequency inverter, 2I |
![]() |
IP67, 4 x M12
|
ASi-3 compatible
|
4 x M12
|
IP67
|
Interroll EC310, Itoh Denki PM500XC/XK, RULMECA RDR BL-2
|
2
|
yes, separately for each motor, 3,5 A (slow-blow fuse)
|
no
|
2
|
no digital outputs
|
out of ASi
|
out of AUX
|
4 x M12 sockets, 5 poles
|
no
|
ASi profile cable
|
M4
|
S-7.A.7.7
|
1 AB address
| BWU2765 ASi Motor Module, IP67, M12 for 24V motorized rollers, 4I/2O/2AO |
![]() |
IP67, 4 x M12
|
ASi-3 compatible
|
4 x M12
|
IP67
|
Itoh Denki PM500XE/XP, Itoh Denki PM605XE/XP
|
2
|
yes, separately for each motor, 3,5 A (slow-blow fuse)
|
no
|
2
|
4 x electronic
|
out of ASi
|
out of AUX
|
4 x M12 sockets, 5 poles
|
no
|
ASi profile cable
|
M4
|
S-7.A.7.7
|
1 AB address
| BWU2901 ASi-3 Motor Module, IP67, M12 for 24V motorized rollers, 2I/4O/2AO |
![]() |
IP67, 8 x M12
|
ASi-3 compatible
|
8 x M12
|
IP67
|
Interroll EC310, Itoh Denki PM500XC/XK, Itoh Denki PM500XE/XP, Itoh Denki PM605XE/XP, RULMECA RDR BL-2
|
2
|
yes, separately for each motor, 3,5 A (slow-blow fuse)
|
no
|
4
|
4 x electronic
|
out of ASi
|
out of AUX
|
8 x M12 sockets, 5 poles
|
no
|
ASi profile cable
|
M4
|
S1-7.A.7.7, S2-7.5.(F).5
|
1 Single address + 1 AB address
| BWU2899 ASi Motor Module, IP67, M12 for 24V motorized rollers, 4I/4O/2AO |
![]() |
IP67, 4 x M12, ASi-5
|
ASi-5 compatible
|
4 x M12
|
IP67
|
SEW MOVIMOT
|
1
|
no
|
no
|
4
|
no digital outputs
|
out of ASi
|
no output voltage
|
4 x M12 sockets, 5 poles
|
no
|
ASi profile cable
|
M5
|
depending on configuration
|
1 ASi-5 address
| BWU4377 ASi-5 Motor Module, IP67, M12 for SEW MOVIMOT, 1M/4I |
![]() |
IP67, 8 x M12
|
ASi-3 compatible
|
8 x M12
|
IP67
|
24 V DC motors
|
2
|
no
|
no
|
4
|
4 x electronic
|
out of ASi
|
out of AUX
|
8 x M12 sockets, 5 poles
|
no
|
ASi profile cable
|
M4
|
S-7.A.7.
|
1 AB address
| BWU3888 ASi Motor Module, IP67, M12 for 24V motorized rollers, 4I/4O |
![]() |
IP67, 4 x M12
|
ASi-3 compatible
|
depth: 42 mm
|
IP67
|
Lenze Smart Motor
|
1
|
no
|
no
|
4
|
3 x electronic
|
out of AUX
|
out of AUX
|
4 x M12 sockets, 5 poles
|
no
|
ASi profile cable
|
M4
|
S-7.A.(7).E
|
1 AB address
| BWU4373 ASi Motor Module, IP67, M12 for Lenze Smart motor, 4I/3O |
![]() |
cable duct motor module
|
ASi-3 compatible
|
depth: 19 mm
|
IP54
|
Interroll EC310, Interroll EC5000 AI, 24 V (20 W/35 W), Itoh Denki PM500XC/XK, RULMECA RDR BL-2
|
2
|
yes, separately for each motor, 4,5 A (slow-blow fuse)
|
yes, depth: 19 mm
|
2
|
no digital outputs
|
out of ASi
|
out of AUX
|
2 x M8 snap-in cable sockets, straight, 5 poles + 2 x M8 cable sockets, straight, 4 poles
|
1 m
|
ASi profile cable
|
M4
|
S-7.A.7.7
|
1 AB address
| BWU4224 Cable Duct ASi Motor Module, IP54, M8 for 24V motorized rollers, 2M/2I |
![]() |
cable duct motor module
|
ASi-3 compatible
|
depth: 19 mm
|
IP54
|
Interroll EC310, Interroll EC5000 AI, 24 V (20 W/35 W), Itoh Denki PM500XC/XK, RULMECA RDR BL-2
|
2
|
yes, separately for each motor, 4,5 A (slow-blow fuse)
|
yes, depth: 19 mm
|
2
|
no digital outputs
|
out of ASi
|
out of AUX
|
2 x M8 snap-in cable sockets, straight, 5 poles + 2 x M8 cable sockets, straight, 4 poles
|
M: 0,40 m, I: 0,06 m
|
ASi profile cable
|
M4
|
S-7.A.7.7
|
1 AB address
| BWU3290 Cable Duct ASi Motor Module, IP54, M8 for 24V motorized rollers, 2M/2I |
![]() |
cable duct motor module
|
ASi-3 compatible
|
depth: 19 mm
|
IP54
|
Interroll EC310, Interroll EC5000 AI, 24 V (20 W/35 W), Itoh Denki PM500XC/XK, RULMECA RDR BL-2
|
2
|
yes, separately for each motor, 4,5 A (slow-blow fuse)
|
yes, depth: 19 mm
|
2
|
no digital outputs
|
out of ASi
|
out of AUX
|
2 x M8 snap-in cable sockets, straight, 5 poles + 2 x M12 cable sockets, straight, 5 poles
|
M: 0,60 m, I: 1 m
|
ASi profile cable
|
M4
|
S-7.A.7.7
|
1 AB address
| BW3409 Cable Duct ASi Motor Module, IP54, M8, M12 for 24V motorized rollers, 2M/2I |
![]() |
cable duct motor module
|
ASi-3 compatible
|
depth: 19 mm
|
IP54
|
Interroll EC310, Itoh Denki PM500XC/XK, RULMECA RDR BL-2
|
2
|
yes, separately for each motor, 3,5 A (slow-blow fuse)
|
yes, depth: 19 mm
|
2
|
no digital outputs
|
out of ASi
|
out of AUX
|
2 x M8 snap-in cable sockets, straight, 5 poles + 2 x M12 cable sockets, straight, 5 poles
|
M: 0,60 m, I: 1 m
|
ASi profile cable
|
M4
|
S-7.A.7.7
|
1 AB address
| BW3813 Cable Duct ASi Motor Module, IP54, M8, M12 for 24V motorized rollers, 2M/2I |
![]() |
cable duct motor module
|
ASi-3 compatible
|
depth: 19 mm
|
IP54
|
Itoh Denki PM500XE/XP, Itoh Denki PM605XE/XP
|
2
|
yes, separately for each motor, 3,5 A (slow-blow fuse)
|
yes, depth: 19 mm
|
4
|
no digital outputs
|
out of ASi
|
out of AUX
|
2 x M8 cable sockets, straight, 5 poles + 2 x M8 cable sockets, straight, 4 poles
|
M: 0,40 m, I: 0,06 m
|
ASi profile cable
|
M4
|
S-7.A.7.7
|
1 AB address
| BWU3278 Cable Duct ASi Motor Module, IP54, M8 for 24V motorized rollers, 2M/4I |
![]() |
cable duct motor module
|
ASi-3 compatible
|
depth: 19 mm
|
IP54
|
Itoh Denki PM500XE/XP, Itoh Denki PM605XE/XP
|
2
|
yes, separately for each motor, 3,5 A (slow-blow fuse)
|
yes, depth: 19 mm
|
4
|
no digital outputs
|
out of ASi
|
out of AUX
|
2 x M8 cable sockets, straight, 5 poles + 2 x M8 cable sockets, straight, 4 poles
|
M: 0,40 m, I: 0,40 m
|
ASi profile cable
|
M4
|
S-7.A.7.7
|
1 AB address
| BWU3567 Cable Duct ASi Motor Module, IP54, M8 for 24V motorized rollers, 2M/4I |
![]() |
cable duct motor module
|
ASi-3 compatible
|
depth: 19 mm
|
IP54
|
Itoh Denki PM500XE/XP, Itoh Denki PM605XE/XP
|
2
|
yes, separately for each motor, 3,5 A (slow-blow fuse)
|
yes, depth: 19 mm
|
4
|
no digital outputs
|
out of ASi
|
out of AUX
|
2 x M8 snap-in cable sockets, straight, 5 poles + 2 x M12 cable sockets, straight, 5 poles
|
M: 0,40 m, I: 0,06 m
|
ASi profile cable
|
M4
|
S-7.A.7.7
|
1 AB address
| BWU3679 Cable Duct ASi Motor Module, IP54, M8 and M12 for 24V motorized rollers, 2M/4I |
![]() |
passive cable duct motor module
|
-
|
depth: 18 mm
|
IP54
|
Itoh Denki PM500XE/XP, Itoh Denki PM605XE/XP
|
2
|
yes, separately for each motor, 3,5 A (slow-blow fuse)
|
yes, depth: 18 mm
|
2 x light barrier
|
no digital outputs
|
out of AUX
|
out of AUX
|
2 x M8 cable sockets, straight, 5 poles+ 1 x M8 cable plug, straight, 5 poles + 2 x M8 cable sockets, straight, 4 poles
|
M: 0,43 m, I: 0,09 m, AUX: 0,13 m
|
-
|
-
|
-
|
-
| BW3452 Passive Cable Duct Motor Module, IP54, M8 for Itoh Denki, 2I |