BWU3639Active Distributor ASi, IP67, 1I/3O
- To connect K50 Series EZ-LIGHT, Typ K50AP...F2Q to ASi.
Product description
Active Distributor ASi, IP67, housing depth 35 mm, 1 digital input, 3 digital outputs, input voltage/sensor supply out of ASi, output voltage/actuator supply out of ASi, periphery connection via 1 x M12 cable socket, angled, 8 poles, cable length 0,30 m, flat design, installation in cable duct possible (installation depth ≥ 35 mm), LED, connection for 1 x ASi profile cable, ASi connection via profile cable and piercing technology, 1 AB address
To connect Banner K50 Series EZ-LIGHT, Typ K50AP...F2Q to ASi.
Technical data
|
Inputs Safety
Safe inputs can be configured as 1-channel or 2-channels depending on the desired application or PL and SIL level.
| no local safe inputs |
| Safety signal inputs | no Safety signal inputs |
| Safety signal outputs | no Safety signal outputs |
|
Input voltage (sensor supply)
inputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, inputs shall not be connected to earth or to external potential. | out of ASi |
|
Output voltage (actuator supply)
Electronic outputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, outputs shall not be connected to earth or to external potential.
For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet. | out of ASi |
|
ASi address
Bihl+Wiedemann offers modules with AB address, single address or ASi-5 address. In some cases, ASi modules can occupy several (different) addresses. Mixed operation of modules with different addressing in the same ASi circuit is permitted. | 1 AB address |
| Special function | to connect Banner K50 Series EZ-LIGHT, Typ K50AP...F2Q to ASi |
